Function of bearing

Bearing its role should be said to be support, that is, the literal interpretation of the bearing, but this is only part of its role, the essence of support is able to bear the radial load. Can also be understood as it is used to fix the shaft. Is to fix the axis so that it can only achieve rotation, and control its axial and radial movement. The consequence of a motor without bearings is that it does not work at all. Because the shaft can move in any direction, the motor requires the shaft to rotate only. It is theoretically impossible to realize the function of transmission, not only that, but also the bearing will affect the transmission. In order to reduce this influence to achieve good lubrication on the bearing of the high-speed shaft, some bearings already have lubrication, called pre-lubricated bearings, and most bearings have lubricating oil, responsible for high-speed operation, because friction will not only increase energy consumption, but also very easily damaged bearings. What effect does the lubricant have on the bearing? Whether rolling bearings or sliding bearings, in the shaft rotation, its rotating part and static part can not be directly in contact, otherwise it will be due to friction cooked and damaged. In order to prevent static part friction, add lubricant. The effect of Lubricant on bearing is mainly shown in three aspects: Lubrication, cooling and cleaning. Bearings can be divided into many kinds, rolling bearings, radial bearings, ball bearings, thrust bearings and so on. Its function should be to support, that is literally used to bearings, but this is only part of its function, the essence of support is to be able to bear radial load. Can also be understood as it is used to fix the shaft. Is to fix the axis so that it can only achieve rotation, and control its axial and radial movement. What is the role of the clutch release bearing? Clutch release bearing is a kind of thrust bearing commonly known as the Clutch Spring Plate, its role is in the clutch pedal under the pressure of the spring-loaded pressure plate or drive plate to move in the direction of the clutch housing, that is to say, when you step down the clutch pedal, tilt the separation lever to overcome the pressure plate spring thrust to complete the separation of the clutch. The separating lever of the clutch rotates with the pressure plate, but the operating mechanism linked with the clutch pedal can not rotate. In order to adapt to the different movement conditions between the two, thrust bearings are used to reduce friction and wear. If the separating bearing loses its sliding function because of the lack of oil, it will not only produce abnormal sound, but also aggravate the AL loss at the force point of the separating Rod, then the effective range of the starting pressure plate of the clutch pedal is getting smaller and smaller. Clutch Plate and pressure plate from incomplete shift will produce abnormal sound, separation rod wear will cause pressure plate starting uneven, driving and driven each other, resulting in shift not on.