Introduction of fixing method of imported bearing inner ring

Imported bearings are divided into inner and Outer Rings, I think we all know this. Then the imported bearing inner and Outer Ring is how to fix it? First of all, we introduce the imported bearing inner ring of the fixed way. 1. Shaft shoulder fixed bearing inner ring rely on shaft shoulder and interference to achieve axial fixation. It is suitable for supporting structure with both ends fixed. Simple structure, small outline size. 2. The inner ring of the elastic retaining ring fixed bearing is axially fixed by the shaft shoulder and the locking nut. Able to bear small axial load in both directions. Small axial size. 3. Lock nut fixed bearing inner ring by the shaft shoulder and lock nut to achieve axial fixation. And has the Stop Washer to prevent loose, reliable, is suitable for the high speed, the heavy load situation. 4. The bearing inner ring is axially fixed by the shaft shoulder and the shaft end retaining ring. The shaft end retaining ring is fixed at the shaft end by screws. The fixing screw should have anti-loosening device. The utility model is suitable for occasions where the shaft end is not suitable for cutting screw threads or the space is restricted. 5. The fastening sleeve is clamped on the shaft by compressing the Radial Dimension of the inner hole of the fastening sleeve to realize the axial fixation of the inner ring of the bearing. 6. The clamping mode of the fixed back-off sleeve of the back-off sleeve is the same as that of the back-off sleeve. But because of the special nut, it is convenient to load and unload the bearing. It is suitable to fix the double row spherical surface bearing with bigger radial load and smaller axial load on the optical axis.